WL-0310 Environmental Low VOC Water Based Alkyed Resin For Metal
And Steel Anti-Corrosion Paint.
Product Introduction
WL-0310 water based alkyd resin dispersion neutralised by ammonia
and containing a small amount of cosolvent . WL-0310 water based
alkyd resin has very low volatile organic compounds (VOC) in
surface coatings, and it has fast drying speed, high gloss,
excellent salt spray resistance, excellent corrosion resistance and
can be grinded with pigment.
The coatings made of WL-0310 water based alkyd resin can be applied
by spraying, roller coating, brushing or dipping, because WL-0310
water based alkyd resin has good fluidity and leveling properties.
It is recommended to use WL-0310 water based alkyd resin for indoor
and high-performance protective coatings and steel structure
coatings for outdoor metal equipment can be used as primers and
topcoats, water-borne self-drying paint or low-temperature baking
paint, Water based alkyd enamel, water based anti-corrosion paint.
Physical Property
| Model | WL-0310 |
| Composition | Water based alkyd resin, cosolvent, neutralizer, water |
| Appearance | White to light brown emulsion |
| Solid content | 42±2 % (GB/T 1725) |
| PH | 8.0-10.0 |
| TVOC | ≤7% (g/L) |
| Viscosity (Brookfield 25℃) | ≤2000 mPa.s |
Performance
- Low VOC
- High gloss
- Excellent corrosion resistance
Applications
- Water-borne self-drying paint or low-temperature baking paint.
- Water based alkyd enamel
- Water based anti-corrosion paint
Suggestion for application
- WL-0310 can be diluted by water, drier has always been added in the
system. It can dry in condition of normal temperature or low
temperature baking .
- WL-0310 is high shear stable. It can be grinded in the coating
production. WL-0310 have high gloss and excellent anti-corrosion
performance, can be used for the mixed paint, anti-rust primer,
etc., can dry by air or bake by low temperature, its coating have
excellent gloss, and anti-rust performance.
- WL-0310 is stable at neutral or slight alkaline conditions. It is
unstable that it is diluted with acidic or impurity water. PH value
has to be carefully observed in coating production, precipitation
may occur if acidic pigments such as carbon black, pH value of the
coating system can be adjusted triethylamine or N,
N-dimthylethanolamine. Viscosity of the dispersion will increase as
the pH value increases.
Packaging and Storage Condition
Package: 200 KG/Barrel
Storage: Place in a cool ventilated place,keep container tightly
closed. Storage temperature is 0-40℃.
Special Tips
This material is complied according to our existing technology and
experience, the technical advice provided is sincere, but it is not
guaranteed to be used in all samples and formulations, all the data
are for users reference only.
