Water based Epoxy Modified Acrylic Emulsion
Epoxy Modified Acrylic WL-130A as a high performance, metal surface
protection paint resin, is widely used in industrial and metal
coatings due to its quick drying, low odor and environmental
protection. Using anti-rust and anti-corrosion paint produced by
WL-130A, it not only has good performance, but also has short
working period, can realize double guarantee of quality and
efficiency.
WL-130A is stable to high shear speed and can be directly used for
pigment paste grinding.
It is recommended for metal protection projects which require short
and fast construction period.
Waterborne epoxy modified acrylic resin WL-130A
Main Component:
Waterborne epoxy modified acrylic resin, neutralizing agent,
co-solvent and water
Specification:
Viscosity: 500-2500 mPa.s(Rotary viscometer)
Non-volatile material: 40.0 ± 2% (120℃/30min)
pH:8.0-10.5 (pH meter)
Appearance: white to light brown liquid
Application:
WL130A can be diluted by water, Drier has always been added in the
system .It can dry in condition of Normal temperature or low
temperature baking .
WL130A is high shear stable. It can be grinded in the coating
production.
WL130A have high gloss and excellent anticorrosion performance, can
be used for the mixed paint, antirust primer, etc., can dry by air
or bake by low temperature, Itscoating have excellent gloss, and
antirust performance
WL130A is stable at neutral or slight alkaline conditions.It is
unstable that it is diluted with acidic or impurity water .PH value
has to be carefully observed in coating production , Precipitation
may occur if acidic pigments such as carbon black ,pH value of the
coating system can beadjustedtriethylamine or
N,N-dimthylethanolamine .Viscosity of the dispersion will increase
as the pH value increases.
Storeagas:
Suggested storage temperature is 0-40℃.Best be uesd within half of
a year after it is produced.. It can be used if the product conform
to the standard after half of a year .
Note:
This specification may have been changed as the product improves.
The latest specification can be obtained from the manufacturer.
