WQ-PR-5100 Water Based Petroleum Resin Emulsion
Product Introduction
WQ-PR-5100 is a water-based modified petroleum resin emulsion. It
is suitable for epoxy ester, alkyd, epoxy and other resin systems
to give water-based coatings quick-drying, film-forming compactness
and strength, improve gloss, improve early water resistance, and
improve the interlayer adhesion of the paint, improves the
corrosion resistance of the anticorrosive paint.
And it has the advantages of C5 petroleum resin and C9 petroleum
resin, with excellent compatibility with a wide range of polymers
and thermoplastic elastomers, especially EVA, SBS, SIS. Widely used
in adhesive, road marking paints, high-grade paints coatings,
rubber tire etc.
It is a kind of thermal plasticizing hydrocarbon resin produced by
C5, C9 fraction, by-products of petroleum cracking, through
pretreatment, polymerization and distillation. It is not a high
polymer but a low polymer with the molecular weight between
300-3000. Generally, the petroleum resins are not used
independently, but have to be used together with other kinds of
resins as promoters, adjusting agents and modifiers in hot-melt
adhesive, pressure-sensitive adhesive, hot melt road marking
paint,[2] rubber tires and so on.
Physical Property
| Solid content | 51% |
| Viscosity(mPa.s) | 0-500 |
| PH | 8-9 |
| Lonicity | anion |
Features
- Featured by acid value
- Easy mutual solubilities
- Resistant to water
- Resistant to ethanol and chemicals.
- Has the chemical stabilizing property to acid and alkaline,
viscosity adjusting and thermal stabilizing
Performance
- Gives water-based coatings excellent quick-drying properties
- Improve film compactness, gloss, early strength of paint film, and
improve early water resistance of paint film
- Improve the adhesion between coating film layers and improve the
corrosion resistance of anti-corrosion coatings
Packaging and Storage Condition
Packing in 200KG/IBC
The recommended storage condition is 0-35℃, and the shelf life is 6
months from the production date.
Usage
Mainly use in hot melt adhesive pressure adhesive sealant as
tackifier, or use in rubber, tire and plastic modified as tackifier
and processing aids, also can use in coating and hot melt road
marking printing as auxiliary etc.
